Setup Router logo in white Setup router name logo in white
Get Software

Reset the MyTech Facile

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

If you need to reset your MyTech Facile router back to factory settings, then this article shows you how. This is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:

  • The router's login credentials are reset.
  • Your WiFi login, password, and network name are reset.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other MyTech Facile Guides

This is the reset router guide for the MyTech Facile. We also have the following guides for the same router:

Recover Password in MyTech Facile

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the MyTech Facile

Most of the time you can find a small reset button located on either the back or the bottom of a router. Most reset buttons look like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Just don't forget that this will totally reset your MyTech Facile router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the MyTech Facile

Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can follow the Facile Login Guide to find everything that you need to log in.

Change Your Password

After logging in, you should really change your router's password for added security. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other MyTech Facile Guides

We have collected a lot of information about the MyTech Facile router. You can find some of our additional content here.

This is the reset router guide for the MyTech Facile. We also have the following guides for the same router: