How to change the IP Address on a NetComm 3G10WVT router

This page shows how to change the LAN IP Address on the NetComm 3G10WVT router.

Other NetComm 3G10WVT Guides

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The NetComm 3G10WVT

To get started configuring the NetComm 3G10WVT LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the NetComm 3G10WVT, follow our NetComm 3G10WVT Login Guide.

Change the LAN IP Address on a NetComm 3G10WVT

If you followed our login guide above then you should see this screen.

When you need to change your IP Address, the address you see from inside your private network, first you must log into the NetComm 3G10WVT. This places you on the Home page. Next, click the tab at the top labeled Advanced, which has a drop down menu, click the top choice of LAN.

Configure the LAN section of your NetComm 3G10WVT

Now, find the box labeled IP Address and enter the new address in this box. For a Router IP Address, a good choice would be 192.168.0.1

Please make sure you do not change the Subnet Mask, this should always remain at 255.255.255.0

Finally, click the Save button.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other NetComm 3G10WVT Info

Don't forget about our other NetComm 3G10WVT info that you might be interested in.

Rachel Bauer

Written by

Rachel Bauer is an owner and primary author for SetupRouter.com. She is available on Google+ and you can find more of her articles in the Networking section of our site.