This page shows how to change the LAN IP Address on the NetComm MyZone-3G24W router.
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
To get started configuring the NetComm MyZone-3G24W LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the NetComm MyZone-3G24W, follow our NetComm MyZone-3G24W Login Guide.
If you followed our login guide above then you should see this screen.
When you need to change your IP Address, the address you see from inside your network, first you must log into the NetComm MyZone 3G24W. This places you on the Home page. Next, click the Status tab, near the battery symbol. From here, click the Wireless LAN choice at the top of the page, in green.
You are now on the Wireless>Configuration page. Find the four boxes in a row labeled Ethernet IP Address and place your cursor in the first of these boxes. Enter the new address you have chosen for your Router here. We recommend using a strong address such as 192.168.1.1
While making this change, please don't change the Ethernet Subnet Mask, this should always remain at 255.255.255.0
Click Save when you have finished making changes to your Router.
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Don't forget about our other NetComm MyZone-3G24W info that you might be interested in.