If you need to reset your Netgear AC1600 C6250EMR router back to factory settings, then this article shows you how. A router reset is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Proceed with caution; resetting your router can be a major headache. The following settings in your router will be changed:
- The router's login and password are reset to factory defaults.
- Your WiFi name and password are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset is the last step you should take in recovering your router's password. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Netgear AC1600 C6250EMR Guides
This is the reset router guide for the Netgear AC1600 C6250EMR. We also have the following guides for the same router:
Recover Password in Netgear AC1600 C6250EMR
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Netgear AC1600 C6250EMR
Usually there is a reset button located on the back or bottom of a router. Look for something that looks like this:
Your reset button may look different, but usually they are very small. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Don't forget, this step will totally reset your Netgear AC1600 C6250EMR router back to factory settings.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Netgear AC1600 C6250EMR
Now you need to log in using the factory default username and password. You can follow the AC1600 C6250EMR Login Guide to find everything that you need to log in.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other Netgear AC1600 C6250EMR Guides
Here are some of our other Netgear AC1600 C6250EMR guides that you might be interested in.
This is the reset router guide for the Netgear AC1600 C6250EMR. We also have the following guides for the same router: