This is the Device screen from the Netgear AC790S Zain router.
The following words were detected on the Netgear AC790S Zain Device screenshot.
AirCard 790S Manager Secondary Navigation Support About Logout English العربية (Arabic) Overview WiFi Jump Boost Messaging Settings Status Zain KW Roaming Internet Connected Disconnect Internet Disconnected Connect Connecting Disconnect Disconnecting Docked Smart Cradle Manage >> Facebook Twitter Mobile Feedback --> Dashboard Alerts ( ) No Data Remaining You have no data remaining. To recharge, use your device touchscreen or visit http://connect.kw.zain.com/ for additional options. Activation Required Please go to http://connect.kw.zain.com and select an Internet plan so you can access the Internet and recharge from this device. Restart the Hotspot once you have selected your Internet plan. Software Update Available The software update process will take several minutes and will not delete any personal data on your device. Start Update Postpone Software Update Available The file size is approximately X MB Retry Activation ALERT_FWDOWNLOADAVAIL_TITLE A software update is available for your hotspot. Download size: . You may incur charges for data used during the download. --> Software Update Available A software update is available for your hotspot. Download size: . You may incur charges for data used during the download. Start Download Update currently downloading. % Software Update Available The software update process will take several minutes and will not delete any personal data on your device. All services will be suspended during the install. Retry Activation Downloading Software Update New software is being downloaded for your hotspot. You may continue to use the hotspot while this happens. Activation Required You need to activate service before you can connect to the internet. Connect to your WiFi device and go to http://att.activate from a web browser. Download Update Hotspot not activated Your hotspot needs to be activated in order to use data services. SIM Error There is an error with your SIM. Please contact your network provider for support. SIM Not Installed Please insert a SIM or check to make sure the SIM is installed properly Invalid SIM Please ensure you are using a SIM provided by your network provider. If there is still a problem, contact your network provider SIM Failure Please ensure you are using a SIM provided by your network provider. If there is still a problem, contact your network provider SIM PIN Locked Your SIM has security enabled. Please press the PIN Entry button below to enter the SIM PIN. Enter PIN SIM Blocked Your SIM requires a PUK code to be entered. Please press the PUK Entry button below to enter the SIM PUK code. Enter SIM PUK SIM Rejected Please contact your network provider SIM Locked If you have a SIM unlock code please click below to enter it in, otherwise contact your network provider for the SIM unlock code. Enter Unlock Code SIM MEP Blocked Please contact your network provider No Network Found Please go to AirCard 790S manager at http:// to select a network or change to Auto Unspecified Alert Device has generated an alert but it is not of a known type. Mobile Broadband Disconnected Your data connection is disconnected. Please turn off Airplane Mode to resume connection Mobile Broadband Disconnected Your data connection is disconnected. Roaming - data charges will apply Cannot Connect To Network The hotspot is unable to connect to the internet because the APN (access point name) may not be setup correctly. Verify the APN settings with your mobile operator, or try searching online. View APN instructions Update APN Settings Click here to connect. Connection Error ( ) The network connection attempt failed. This issue may be resolved by updating your network settings. Update network settings WiFi Disabled Your WiFi Network is disabled. Enable Main Wi-Fi at Capacity You have devices connected to your main Wi-Fi network. No more devices can connect to Main Wi-Fi until at least one disconnects, or if you change the distribution of devices. Secondary Wi-Fi at Capacity You have devices connected to your secondary Wi-Fi network. No more devices can connect to secondary Wi-Fi until at least one disconnects, or if you change the distribution of devices. Battery is Critical Please charge battery immediately to prevent usage interruption SMS Memory Full Please delete some messages to receive new ones Unable to complete Software Update. Please connect the device to the charger. Update will resume automatically when the battery level has reached 20%. Roaming Guard You are roaming. Do you want to proceed with data roaming? You may incur additional charges. Connect to Network Do not connect Roaming Guard Options Roaming Guard You are roaming. Do you want to proceed with data roaming? You may incur additional charges. Connect to Network Do not connect Roaming Guard Options WiFi Restricted WiFi access is currently restricted on this device. USB Restricted USB access is currently restricted on this device. WiFi User Roaming Restriction You are limited to 1 WiFi user when roaming on this network Battery Level Critical Your device battery level is critically low and will power off shortly. Please charge your device to continue using it. Session 0 MB used 0 Elapsed time Session Not connected Monthly Usage USED days remaining Displayed data usage is intended to help manage usage. The amounts shown are approximate and may vary. Billing start date Day 1 each month Day 2 each month Day 3 each month Day 4 each month Day 5 each month Day 6 each month Day 7 each month Day 8 each month Day 9 each month Day 10 each month Day 11 each month Day 12 each month Day 13 each month Day 14 each month Day 15 each month Day 16 each month Day 17 each month Day 18 each month Day 19 each month Day 20 each month Day 21 each month Day 22 each month Day 23 each month Day 24 each month Day 25 each month Day 26 each month Day 27 each month Day 28 each month Day 29 each month Day 30 each month Day 31 each month Reset to zero on start date Submit Cancel Reset Connected Devices ( AirCard 790S ) Connected Devices Log into NETGEAR Genie (Smart Cradle manager) to view devices connected to WiFi. WiFi Info WiFi from your hotspot is temporary disabled as the Smart Cradle WiFi is being used while docked. Your WiFi Details BUTTON_PRINT_WIFI Main WiFi Password: WPS Secondary WiFi Password: WPS More to Explore Get the app Download the companion app for your hotspot today Connect with us Like us on Facebook to receive the latest news, promotions, contests, and more Have your say Your feedback is important to us. Complete our product survey now. « » WiFi Connect Options MAC Filter Disable WiFi Enable WiFi WiFi is currently broadcasted from the Smart Cradle, in place of the mobile hotspot To manage hotspot WiFi settings , undock the hotspot and refresh this page To manage Smart Cradle settings , or to set custom options (e.g. use the hotspot WiFi while docked use the cradle in charge only mode), login to NETGEAR Genie >> How it works Mobile Hotspot Serves as internet router when docked Smart Cradle Provides WiFi when hotspot docked Main Wi-Fi This is your primary network. Devices on this network can communicate and share files or printers. WiFi name: WiFi password: WPS Edit Secondary Wi-Fi Guest Wi-Fi creates a one-time, unique password for temporary visitors to access your Wi-Fi hotspot. Turn On Turn Off --> WiFi name: Zain_LTE_A-5GHz WiFi password: WPS Wi-Fi Profiles: Default (No secondary network) 5GHz WiFi Guest WiFi Dual Band WiFi Custom Setup Set up an additional Wi-Fi network if you would like to use dual-band (5GHz) compatible devices with the hotspot, and/or for a separate guest network. Main WiFi WiFi name WiFi password Encryption None WEP 64 Open WEP 64 Shared WEP 128 Open WEP 128 Shared WPA Personal TKIP WPA Personal TKIP AES WPA2 Personal AES WPA2 Personal TKIP AES WPA/WPA2 Frequency Channel 2.4 GHz Auto 1 2 3 4 5 6 7 8 9 10 11 12 13 5 GHz Mode 802.11 B 802.11 G 802.11 B/G 802.11 B/N 802.11 G/N 802.11 B/G/N 802.11 A 802.11 A/N 802.11 AC 802.11 AN/AC Broadcast Network Name Hide Show Secondary WiFi Enable secondary Wi-Fi network WiFi name WiFi password Encryption None WEP 64 Open WEP 64 Shared WEP 128 Open WEP 128 Shared WPA Personal TKIP WPA Personal TKIP AES WPA2 Personal AES WPA2 Personal TKIP AES WPA/WPA2 Frequency Channel 2.4 GHz Auto 1 2 3 4 5 6 7 8 9 10 11 12 13 5 GHz Mode 802.11 B 802.11 G 802.11 B/G 802.11 B/N 802.11 G/N 802.11 B/G/N 802.11 A 802.11 A/N 802.11 AC 802.11 AN/AC Broadcast Network Name Hide Show Guest Mode Guest Wi-Fi Guest Wi-Fi allows you to share your Wi-Fi with temporary visitors without exposing them to your devices on main Wi-Fi. Generate a new password each time I turn on the Guest WiFi WiFi Options Max Wi-Fi 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 < Main WiFi + Secondary WiFi > 2.4 GHz Bandwidth 20 MHz 40 MHz 5 GHz Bandwidth 40 MHz 80 MHz WiFi Info on Home Show Hide WiFi Range Short (small coverage, less power) Medium Long (large coverage, more power) USB Tethering Wi-Fi stays Off Wi-Fi stays On Connection RTS Threshold Fragmentation Threshold Submit Cancel MAC Filter Mode None Black list - Block all in list White list - Allow only those in list Submit Cancel Black List Id Name MAC Address id name mac address + White List Id Name MAC Address id name mac address + Main WiFi Secondary WiFi Device Details --> WiFi > IP MAC Block Device --> Block Device Are you sure you want to block this device? Block Device Cancel --> WPS WPS allows a device that supports this feature to securely connect to your hotspot without the WiFi password. WPS button pairing Enter WPS PIN Please enter the PIN provided by your WPS enabled device. Submit --> Submit Cancel Select the WPS button on your connecting device to pair with your hotspot seconds remaining Cancel Messaging Messaging New Delete Reply Are you sure you want to delete this message? Delete Cancel Delete all No SMS Messages Messaging To: Message: Discard Send Searching for satellites... Cancel Status: Inactive Update Location Searching for satellites... Stop Tracking in progress... Stop Status: Inactive Start Time of fix Latitude Longitude Altitude Speed Heading Satellites GPS Settings Enable GPS Yes No Use Metric units Yes No GPS mode One-time Continuous Submit Cancel TITLE_SETTINGS General Network Router Device Software and Reset System Logs Language Default Language English العربية (Arabic) Display Display Brightness 1 (Dim) 2 3 4 5 6 7 (Bright) Screen Timeout Display Timeout 30 seconds (best battery life) 1 minute 5 minutes 10 minutes Never Timeout on AC 30 seconds (best battery life) 1 minute 5 minutes 10 minutes Never Timeout on USB 30 seconds (best battery life) 1 minute 5 minutes 10 minutes Never --> Hotspot LED LED On Off Sleep WiFi Standby 5 minutes (best battery life) 15 minutes 60 minutes Never Homepage Host Name Domain Name Admin login Submit Cancel Download / Backup Settings Download a copy of your hotspot's settings onto your computer so you can restore it later. Save Restore Settings If you saved your settings on a file previously, import it here to restore your hotspot with those settings. --> Submit Software Update Checking for updates... No update available There are no updates available for your device at this time. Please check again later. Software Update feature is currently disabled. Software Update Available A software update is available for your hotspot. Download size: . You may incur charges for data used during the download. Start Download Postpone --> Update currently downloading. % Update Downloaded Update downloaded successfully. Update Error There was a problem in checking for updates. Please try again later. Update Available Please do not turn off your hotspot while the installation is in progress(about ten minutes). The device will reboot automatically and display a notification when complete. Start Update Postpone Unable to complete Software Update. Please connect the device to the charger. Update will resume automatically when the battery level has reached 20%. Update was postponed... Updating Update currently in progress Update Status The software update was successful! Update Error There was a problem updating your device. Please try again later. Last checked at: Check for update Checking for updates... --> Reset Factory Reset Reset your hotspot to factory settings, just like when you took it out of the box the first time. Reset Please enter the MSL code to continue Submit Cancel Enable Logs Low Medium High Error Submit Cancel Logs Clear logs Download logs Date Event Args Preferences APN SIM Security Status Details Network Mode All Bands 4G Only 3G Only Auto Connect Never (connect manually each use) Always except when roaming Always Network selection mode Automatic Automatic Scan Scanning... Submit Cancel Index Id Name APN Username Password Authentication PDP PDP Roaming Name APN Authentication None PAP CHAP PAP or CHAP Username Password PDP IPV4 IPV6 IPV4V6 PDP Roaming None IPV4 IPV6 IPV4V6 Edit Save Cancel Delete Add SIM Security: Active Update SIM PIN Inactive Unknown SIM Blocked SIM Locked Disable Enter your PIN to disable SIM security. SIM PIN Activating SIM Security will require you to enter a SIM PIN each time you power on the hotspot. Activate Enter your PIN to activate SIM security. Obtain the default PIN from your carrier. SIM PIN Current SIM PIN New SIM PIN Verify SIM PIN Your SIM requires a PUK code to be entered. Please press the PUK entry button below to enter the SIM PUK code. Enter SIM PUK If you have a SIM unlock code please click below to enter it in, otherwise contact your network provider for the SIM unlock code. Enter Unlock Code Submit Cancel Status Connected Disconnected Connecting Disconnecting PS service type IP Address 4G Details 3G Details 2G Details Status Connected Disconnected Connecting Disconnecting PS service type Network Zain KW Roaming false RSRP -84 RSRQ -10 RS-SINR 23 RSSI -55 ECIO -31 RSCP -55 RSSI -55 ECIO -31 RSCP -55 PLMN LAC 41086 RAC 64 PSC 88 Cell ID TX Power 0 IP Address Quality 55 Channel UL 19724 Channel Number 1724 IMSI Current radio band LTE B3 Reject Code 0 ICCID LTE Band Settings Priority Band 25 (always enabled) 1 2 3 Band 26 1 2 3 Band 41 1 2 3 Submit Cancel Data Link enabled Enable Disable 4G Settings LTE Username LTE Password LTE APN NI LTE Auth Type None CHAP PAP LTE PDN Type IPv4 IPv6 IPv4/v6 3G Settings User NAI AAA SPI HA SPI AAA shared secret Home address Primary HA address Secondary HA address Reverse tunnelling Enable Disable HA Secret Enable Disable Submit Cancel Basic Port Forwarding Port Filtering UPnP UPnP On Off UPNP should only be enabled if absolutely necessary as it can result in high security risks for your network. LAN IP Address Netmask USB IP Address 192.168.1.4 IP Passthrough Mode Enabled Disabled Automatic (while docked on Smart Cradle) This option turns off the router function of the device and assigns the network IP address directly to the attached host. This option can be useful for implementing secure, enterprise VPNs. The device will reset after making this change to re-start using a different driver configuration. At this time, this feature is only available to PC users. If you are a Mac user, please do not enable this option as you will be unable to access your device. Please check support.netgear.com for further updates on future Mac support. VPN Passthrough On Off DHCP Server Enabled Disabled DHCP IP Range - DHCP lease time (minutes) DNS mode Manual Auto DNS 1 DNS 2 DMZ DMZ Enabled On Off DMZ Address Submit Cancel Port Forwarding Enable Disable Id Label IP Port Protocol ID label IP private_port protocolName TCP UDP + Submit Cancel Port Filtering No Filtering Black List White List Submit Cancel Black List id Label Port Protocol id Label start_port protocolName TCP UDP + White List id Label Port Protocol id label start_port protocolName TCP UDP + About Account Details Wireless number: N/A IMEI: N/A IMEI SV: N/A IMSI: N/A ICCID: N/A WiFi Details MAC Address: N/A WiFi Range: N/A Main WiFi Name: N/A Password: N/A Encryption: N/A Mode: N/A Band: N/A Bandwidth: N/A Devices: 0 / 0 Broadcast Network Name: Hide Show N/A Secondary WiFi Name: N/A Password: N/A Encryption: N/A Mode: N/A Band: N/A Bandwidth: N/A Devices: 0 / 0 Broadcast Network Name: Hide Show N/A WWAN Info IP Address Save to File Device Model: AirCard 790S AC790S Manager: http:// PRI Version: , N/A Power State: N/A Current temperature: N/A °C Current voltage: N/A mV Battery charge level: N/A % Battery status: N/A Battery temperature: N/A °C Firmware Firmware Version: N/A Firmware Build Date: N/A Web App Version: N/A Bootloader Version: N/A Hardware Version: N/A TRU-Install: N/A Network Status View Details Open Source View Credits & Licenses GNU GPL Support User Guide Learn how to set up and use your hotspot. Online Help Visit support site for more information --> Feedback --> Connect with us Facebook Twitter Jump Boost Warning: Battery below 10% If your tablet or smartphone is out of battery, you can give it some juice from your hotspot. Reminder: you can't charge while boosting. left in boost mode End Boost Connect the Jump Boost cable to the mobile hotspot's charging port. To ensure proper battery performance and charging, you must use the Jump Boost cable included in the box. Connect your smartphone's charging cable to the Jump Boost connector Connect your smartphone to the charging cable Choose how long you want to enable boost for. The timer starts immediately after you press the button below. 30 minute boost 60 minute boost 90 minute boost Optional: Enable airplane mode if you would like to charge your device while in airplane Enable Airplane Mode Disable Airplane Mode 2015 NETGEAR Please Log In to use this feature. Error Saving Changes Device has been blocked Error blocking device Entry added Entry added Error adding entry Error adding entry Entry deleted Entry deleted Error deleting entry Error deleting entry Entry Added Entry Added Error adding entry. An Internet connection is required Error adding entry. An Internet connection is required Entry deleted Entry deleted Error deleting entry Error deleting entry Entry added Error adding entry Entry deleted Error deleting entry SMS message deleted Error deleting SMS Message sent successfully --> Message failed to send A message is in progress of being sent. SIM PIN Accepted Invalid SIM PIN Invalid SIM PIN You have retries left. SIM PUK Accepted Invalid SIM PUK Unlock Code Accepted Invalid Unlock Code Error setting current profile Profile Set Error creating profile Profile created APN name is required. APN is required. Error deleting profile Profile Deleted Error updating profile Profile Updated Your changes have been saved Your changes have been saved. You may have to reconnect your WiFi enabled device (or computer) to your hotspot and reload this page once reconnected. Use WiFi network name and password . Your changes have been saved. Your device is currently restarting. You may have to reload this page once your device restarts. No device was connected. You can retry WPS pairing or connect via the WiFi network name and password on your WiFi device. Your device can now access the internet. WPS cannot be used while device blocking (MAC filtering) is enabled. Update Postponed Error Postponing Update Update Started... Error saving empty white list - The list cannot be empty Error adding record, list has a limit of 10 records Error creating network folder Network folder created Error deleting network folder Network folder deleted Error updating network folder Network folder updated No networks available Lost connection to Hotspot. Your Hotspot may be restarting or powered off. There is an error with your SIM. Please contact your network provider for support. Ok Resetting Device Your device will automatically power up after reset. You have unsaved changes. Discard Cancel Configuration successfully imported Your device is now restarting Configuration import failed The configuration file could not be imported. Cancel Firmware successfully updated Your device is now restarting Firmware update failed Firmware could not be updated. Cancel Postpone Update The software update has been postponed. Update software in: 1 hour 4 hours 8 hours Postpone Cancel In order to save these changes, your device will need to restart WiFi connections. Any currently connected devices will temporarily lose their connection. Continue? Submit Cancel In order to save these changes, your device will need to restart. Continue? Submit Cancel International roaming charges apply to data usage outside of the U.S., Puerto Rico, and U.S.V.I. Set Auto Connect to "Always except when roaming" to avoid international data roaming charges. Submit Cancel Warning: You are roaming this may incur significantly higher charges. Ok Warning: You are roaming this may incur significantly higher charges. Ok Cancel SIM PIN Locked Your SIM has security enabled. Please press the PIN Entry button below to enter the SIM PIN. Enter SIM PIN Retries remaining 3 Submit Cancel SIM Blocked Your SIM requires a PUK code to be entered. Please press the PUK Entry button below to enter the SIM PUK code. Enter SIM PUK Enter New SIM PIN Verify SIM PIN: Retries remaining 10 Submit Cancel SIM Locked If you have a SIM unlock code please click below to enter it in, otherwise contact your network provider for the SIM unlock code. Enter Unlock Code Submit Cancel Are you sure you want to reset your hotspot to factory conditions? Please note that: All your customizations and settings will be erased. You can also export your settings as a file then restore them by importing them later. Devices currently connected will lose access. You may need to re-authenticate their WiFi connection to the hotspot. Begin Reset Cancel LBS end user license agreement TEXT_GPS_AGREEMENT I Agree Submit Cancel You have been redirected to the AC790S Manager because your hotspot is not connected to the internet. OK Check APN Settings The hotspot is unable to connect to the internet because the APN (access point name) may not be setup correctly. Verify the APN settings with your mobile operator, or try searching online. View APN instructions Update APN Settings SIM Info Operator: IMSI Are you sure you want to delete all of your messages? Cancel Confirm Message failed to send To: Message: Try again Cancel Draft Message sent Message has been delivered to . Open Network Are you sure you want to create an unsecured WiFi Network? Ok Cancel Warning: You are roaming this may incur significantly higher charges. Ok Cancel X DATA_USAGE_TITLE_LOW DATA_USAGE_DESCRIPTION_LOW_1 DATA_USAGE_DESCRIPTION_LOW_2 DATA_USAGE_PREPAID_DESCRIPTION Continue X DATA_USAGE_TITLE_DANGER DATA_USAGE_DESCRIPTION_DANGER_1 DATA_USAGE_DESCRIPTION_DANGER_2 DATA_USAGE_PREPAID_DESCRIPTION BUTTON_TOP_UP Skip Activation? Are you sure you want to skip this setup process? You may have to edit your WAN profile in Advanced WAN Setup. OK Cancel