Reset the Netgear B90-755044-15

Thumbnail image of

Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Netgear B90-755044-15 router to factory default settings. This is not the same thing as rebooting a router. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:

  • The router's login credentials are reset.
  • All WiFi settings are reset, including network name and password.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any port forwards, firewall settings, or parental controls that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Netgear B90-755044-15 Guides

This is the reset router guide for the Netgear B90-755044-15 v6 Frontier. We also have the following guides for the same router:

Recover Password in Netgear B90-755044-15

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Netgear B90-755044-15

There is usually a small reset button located on either the back or the bottom of a router. Look at your router and try to find something that looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You can hold the button down as long as you like, it will not hurt anything.

Remember, this will erase everything you have previously done to this Netgear B90-755044-15 router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Netgear B90-755044-15

After you are finished resetting your router, you need to login in using the original factory username and password. We have a B90-755044-15 Login Guide with all this information ready for you.

Change Your Password

You need to change your router's default password after you log in for the first time. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Netgear B90-755044-15 Guides

If you want additional help with your Netgear B90-755044-15 be sure to check out some of our other guides.

This is the reset router guide for the Netgear B90-755044-15 v6 Frontier. We also have the following guides for the same router: