Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear C7000-100NAS

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This article covers how to reset the Netgear C7000-100NAS router back to factory default settings. A router reset is very different than a router reboot. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings in your router will be changed:

  • The router's login and password are reset to factory defaults.
  • All WiFi login information and network names are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

A router reset is the last step you should take in recovering your router's password. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Netgear C7000-100NAS Guides

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the reset router guide for the Netgear C7000-100NAS v1.01.14. We also have the following guides for the same router:

Recover Password in Netgear C7000-100NAS

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Netgear C7000-100NAS

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN is the fastest VPN deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

On most routers you can find a small button on the back or the bottom labeled reset. This is what a typical reset button looks like:

Router Reset Button

Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You can hold the button down as long as you like, it will not hurt anything.

Don't forget, this step will totally reset your Netgear C7000-100NAS router back to factory settings.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the Netgear C7000-100NAS

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. We have a C7000-100NAS Login Guide with all this information ready for you.

Change Your Password

After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Netgear C7000-100NAS Guides

If you want additional help with your Netgear C7000-100NAS be sure to check out some of our other guides.

This is the reset router guide for the Netgear C7000-100NAS v1.01.14. We also have the following guides for the same router: