This page shows how to change the LAN IP Address on the Netgear DG824M router.
Other Netgear DG824M Guides
This is the ip address guide for the Netgear DG824M. We also have the following guides for the same router:
- Netgear DG824M - Netgear DG824M User Manual
- Netgear DG824M - Netgear DG824M Login Instructions
- Netgear DG824M - How to change the DNS settings on a Netgear DG824M router
- Netgear DG824M - Setup WiFi on the Netgear DG824M
- Netgear DG824M - Information About the Netgear DG824M Router
- Netgear DG824M - Netgear DG824M Screenshots
- Netgear DG824M - Reset the Netgear DG824M
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Netgear DG824M
To get started configuring the Netgear DG824M LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Netgear DG824M, follow our Netgear DG824M Login Guide.
Change the LAN IP Address on a Netgear DG824M
If you followed our login guide above then you should see this screen.
Once you have finished logging into the Netgear DG824M you see the Gateway Status page. When you need to change your IP Address, the address you see from inside your network, click the choice on the left labeled LAN IP Setup, it is under the heading of Advanced.
Configure the LAN section of your Netgear DG824M
Next, find the four boxes labeled IP Address and type in your new address you have chosen for your Router. This screenshot shows one good choice, 192.168.0.1
Make sure to leave the Subnet Mask at 255.255.255.0
Last of all, click the Apply button.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Netgear DG824M Info
Don't forget about our other Netgear DG824M info that you might be interested in.
This is the ip address guide for the Netgear DG824M. We also have the following guides for the same router:
- Netgear DG824M - Netgear DG824M User Manual
- Netgear DG824M - Netgear DG824M Login Instructions
- Netgear DG824M - How to change the DNS settings on a Netgear DG824M router
- Netgear DG824M - Setup WiFi on the Netgear DG824M
- Netgear DG824M - Information About the Netgear DG824M Router
- Netgear DG824M - Netgear DG824M Screenshots
- Netgear DG824M - Reset the Netgear DG824M