This page shows how to change the LAN IP Address on the Netgear KWGR614 router.
Other Netgear KWGR614 Guides
This is the ip address guide for the Netgear KWGR614. We also have the following guides for the same router:
- Netgear KWGR614 - Netgear KWGR614 User Manual
- Netgear KWGR614 - Netgear KWGR614 Login Instructions
- Netgear KWGR614 - How to change the DNS settings on a Netgear KWGR614 router
- Netgear KWGR614 - Setup WiFi on the Netgear KWGR614
- Netgear KWGR614 - Information About the Netgear KWGR614 Router
- Netgear KWGR614 - Netgear KWGR614 Screenshots
- Netgear KWGR614 - Reset the Netgear KWGR614
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Netgear KWGR614
To get started configuring the Netgear KWGR614 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Netgear KWGR614, follow our Netgear KWGR614 Login Guide.
Change the LAN IP Address on a Netgear KWGR614
If you followed our login guide above then you should see this screen.
Now that you have logged into the Netgear KWGR614 you should begin on the Router Status page. To change your IP Address, the address you see from inside your private network, scroll down the dark blue bar on the left and click the choice labeled LAN IP Setup.
Configure the LAN section of your Netgear KWGR614
On this new page, place your cursor in the first of the four boxes labeled IP Address. Type in your new address here. For your Router a good address would be 192.168.1.1, another good choice is the one you see in this screenshot.
Don't change the Subnet Mask, this should typically be kept at 255.255.255.0
Finally, click the Apply button.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Netgear KWGR614 Info
Don't forget about our other Netgear KWGR614 info that you might be interested in.
This is the ip address guide for the Netgear KWGR614. We also have the following guides for the same router:
- Netgear KWGR614 - Netgear KWGR614 User Manual
- Netgear KWGR614 - Netgear KWGR614 Login Instructions
- Netgear KWGR614 - How to change the DNS settings on a Netgear KWGR614 router
- Netgear KWGR614 - Setup WiFi on the Netgear KWGR614
- Netgear KWGR614 - Information About the Netgear KWGR614 Router
- Netgear KWGR614 - Netgear KWGR614 Screenshots
- Netgear KWGR614 - Reset the Netgear KWGR614