Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear Nighthawk RAX70

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This article covers how to reset the Netgear Nighthawk RAX70 router back to factory default settings. A router reset is very different than a router reboot. Turning a router off and back on again causes a reboot. However, when you reset a router you, return it back to its factory default settings.

Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:

  • The router's login credentials are reset.
  • All WiFi login information and network names are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Netgear Nighthawk RAX70 Guides

This is the reset router guide for the Netgear Nighthawk RAX70 v1.0.10.110. We also have the following guides for the same router:

Recover Password in Netgear Nighthawk RAX70

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Netgear Nighthawk RAX70

On most routers you can find a small button on the back or the bottom labeled reset. Look at your router and try to find something that looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. It is harmless to hold the reset button too long.

Don't forget, this step will totally reset your Netgear Nighthawk RAX70 router back to factory settings.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Netgear Nighthawk RAX70

After you are finished resetting your router, you need to login in using the original factory username and password. Our Nighthawk RAX70 Login Guide has all of the information that you need.

Change Your Password

You need to change your router's default password after you log in for the first time. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other Netgear Nighthawk RAX70 Guides

This isn't our only Netgear Nighthawk RAX70 guide. We also have the following guides for this router.

This is the reset router guide for the Netgear Nighthawk RAX70 v1.0.10.110. We also have the following guides for the same router: