Setup Router logo in white Setup router name logo in white
Get Software

Reset the Netgear Nighthawk RAX70

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This is the reset guide for the Netgear Nighthawk RAX70 router. A router reset is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. A router reset will affect the following settings:

  • The router's login and password are reset.
  • Your WiFi name and password are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Netgear Nighthawk RAX70 Guides

This is the reset router guide for the Netgear Nighthawk RAX70 v1.0.11.112. We also have the following guides for the same router:

Recover Password in Netgear Nighthawk RAX70

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Netgear Nighthawk RAX70

Usually there is a reset button located on the back or bottom of a router. Look at your router and try to find something that looks like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. You may need a paper clip to push the reset button.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. You can hold the button down as long as you like, it will not hurt anything.

Don't forget, this step will totally reset your Netgear Nighthawk RAX70 router back to factory settings.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Netgear Nighthawk RAX70

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can follow the Nighthawk RAX70 Login Guide to find everything that you need to log in.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Netgear Nighthawk RAX70 Guides

If you want additional help with your Netgear Nighthawk RAX70 be sure to check out some of our other guides.

This is the reset router guide for the Netgear Nighthawk RAX70 v1.0.11.112. We also have the following guides for the same router: