This article covers how to reset the Netgear R7000 router back to factory default settings. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. However, when you reset a router you, return it back to its factory default settings.
Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:
- The router's login and password are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any parental controls, firewall settings, or port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Netgear R7000 Guides
This is the reset router guide for the Netgear R7000. We also have the following guides for the same router:
- Netgear R7000 - Setup WiFi on the Netgear R7000
- Netgear R7000 - How to change the IP Address on a Netgear R7000 router
- Netgear R7000 - Netgear R7000 Login Instructions
- Netgear R7000 - Netgear R7000 User Manual
- Netgear R7000 - How to change the DNS settings on a Netgear R7000 router
- Netgear R7000 - Netgear R7000 Screenshots
- Netgear R7000 - Information About the Netgear R7000 Router
Recover Password in Netgear R7000
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Netgear R7000
On most routers you can find a small button on the back or the bottom labeled reset. Most reset buttons look like this:
Yours may look slightly different, but they are usually tiny. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The blinking pattern of the lights on the front of the router should change when the reset is complete. You can hold the button down as long as you like, it will not hurt anything.
Just don't forget that this will totally reset your Netgear R7000 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Netgear R7000
Now you need to log in using the factory default username and password. Just follow our R7000 Login Guide to find all of the information that you need.
Change Your Password
Do not forget to change your router's default password when you log back into it. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Netgear R7000 Guides
If you want additional help with your Netgear R7000 be sure to check out some of our other guides.
This is the reset router guide for the Netgear R7000. We also have the following guides for the same router:
- Netgear R7000 - Setup WiFi on the Netgear R7000
- Netgear R7000 - How to change the IP Address on a Netgear R7000 router
- Netgear R7000 - Netgear R7000 Login Instructions
- Netgear R7000 - Netgear R7000 User Manual
- Netgear R7000 - How to change the DNS settings on a Netgear R7000 router
- Netgear R7000 - Netgear R7000 Screenshots
- Netgear R7000 - Information About the Netgear R7000 Router