How to change the IP Address on a Netgear VMDG480 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Netgear VMDG480 router.

Other Netgear VMDG480 Guides

This is the ip address guide for the Netgear VMDG480 v2.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Netgear VMDG480

To get started configuring the Netgear VMDG480 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Netgear VMDG480, follow our Netgear VMDG480 Login Guide.

Change the LAN IP Address on a Netgear VMDG480

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Netgear router.

Now that you have logged into the Netgear VMDG480v2, the first page you should see is the Home page of your Router. To change your IP Address, the address you can see from inside your network, click the choice in the lower right corner of the page labeled Advanced Settings. Next, click DHCP and DHCP Settings.

Configure the LAN section of your Netgear VMDG480

router setup
This is the setup page from your Netgear router.

You are now on the LAN IP page. Place your cursor in the box marked IP Address, and enter the new one you have chosen for your Router. One good choice is the address of 192.168.0.1 just like in this screenshot.

Click Apply when you have finished.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Netgear VMDG480 Info

Don't forget about our other Netgear VMDG480 info that you might be interested in.

This is the ip address guide for the Netgear VMDG480 v2.We also have the following guides for the same router: