If you need to reset your Netopia 3000 router back to factory settings, then this article shows you how. This is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:
- The router's login credentials are reset.
- Your WiFi name and password are reset.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset is the last step you should take in recovering your router's password. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Netopia 3000 Guides
This is the reset router guide for the Netopia 3000. We also have the following guides for the same router:
- Netopia 3000 - How to change the IP Address on a Netopia 3000 router
- Netopia 3000 - Netopia 3000 User Manual
- Netopia 3000 - Netopia 3000 Login Instructions
- Netopia 3000 - How to change the DNS settings on a Netopia 3000 router
- Netopia 3000 - Setup WiFi on the Netopia 3000
- Netopia 3000 - Information About the Netopia 3000 Router
- Netopia 3000 - Netopia 3000 Screenshots
Recover Password in Netopia 3000
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the Netopia 3000
Most of the time you can find a small reset button located on either the back or the bottom of a router. A typical reset button looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Hold the reset button down for 10 seconds and watch the lights. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. It is harmless to hold the reset button too long.
Remember, this will erase everything you have previously done to this Netopia 3000 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Netopia 3000
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. We have a 3000 Login Guide with all this information ready for you.
Change Your Password
Do not forget to change your router's default password when you log back into it. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Netopia 3000 Guides
Here are some of our other Netopia 3000 guides that you might be interested in.
This is the reset router guide for the Netopia 3000. We also have the following guides for the same router:
- Netopia 3000 - How to change the IP Address on a Netopia 3000 router
- Netopia 3000 - Netopia 3000 User Manual
- Netopia 3000 - Netopia 3000 Login Instructions
- Netopia 3000 - How to change the DNS settings on a Netopia 3000 router
- Netopia 3000 - Setup WiFi on the Netopia 3000
- Netopia 3000 - Information About the Netopia 3000 Router
- Netopia 3000 - Netopia 3000 Screenshots