How to change the IP Address on a Netopia 3347-02 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

This page shows how to change the LAN IP Address on the Netopia 3347-02 router.

Other Netopia 3347-02 Guides

This is the ip address guide for the Netopia 3347-02 v1. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Netopia 3347-02

To get started configuring the Netopia 3347-02 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Netopia 3347-02, follow our Netopia 3347-02 Login Guide.

Change the LAN IP Address on a Netopia 3347-02

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Netopia 3347-02 router.

After you have decided to change your IP Address, the address you can see from inside your network, you first need to log into the Netopia 3347-02. This places you on the Home page. Click the choice on the left labeled Configure, then LAN.

Configure the LAN section of your Netopia 3347-02

router setup
This is the setup page from your Netopia 3347-02 router.

You are now on the LAN IP Interface page. Place your cursor in the box marked IP Address. This is where you enter your new address you have chosen for your Router. One good choice other than the one you see in this screenshot, is 192.168.1.1

While you make this change to your Router IP Address, make sure you do not change the IP Netmask. That should stay at 255.255.255.0

Finally, click the Submit button.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Netopia 3347-02 Info

Don't forget about our other Netopia 3347-02 info that you might be interested in.

This is the ip address guide for the Netopia 3347-02 v1. We also have the following guides for the same router: