Setup Router logo in white Setup router name logo in white
Get Software

Reset the Pirelli DRG-A124G

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This is the reset guide for the Pirelli DRG-A124G router. A router reset is very different than a router reboot. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings in your router will be changed:

  • The router's login and password are reset.
  • All WiFi settings are reset, including network name and password.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Pirelli DRG-A124G Guides

This is the reset router guide for the Pirelli DRG-A124G. We also have the following guides for the same router:

Recover Password in Pirelli DRG-A124G

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Pirelli DRG-A124G

On most routers you can find a small button on the back or the bottom labeled reset. Most reset buttons look like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the button is under a pinhole, and you need a paper clip to push it.

Hold the reset button down for 10 seconds and watch the lights. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not worry about holding the button down too long; this is harmless.

Remember, this will totally reset your Pirelli DRG-A124G router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Pirelli DRG-A124G

After you are finished resetting your router, you need to login in using the original factory username and password. Just follow our DRG-A124G Login Guide to find all of the information that you need.

Change Your Password

After logging in, you should really change your router's password for added security. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Pirelli DRG-A124G Guides

This isn't our only Pirelli DRG-A124G guide. We also have the following guides for this router.

This is the reset router guide for the Pirelli DRG-A124G. We also have the following guides for the same router: