Setup Router logo in white Setup router name logo in white
Get Software

Reset the Pirelli Wireless VoIP AG

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

If you need to reset your Pirelli Wireless VoIP AG router back to factory settings, then this article shows you how. Resetting a router is different than rebooting a router. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: This is not a step to be taken lightly. The following settings in your router will be changed:

  • The router's username and password are reset to factory defaults.
  • Your WiFi name and password are reset.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Pirelli Wireless VoIP AG Guides

This is the reset router guide for the Pirelli Wireless VoIP AG v1. We also have the following guides for the same router:

Recover Password in Pirelli Wireless VoIP AG

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Pirelli Wireless VoIP AG

Most routers have a small button on either the back or the bottom. Most reset buttons look like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Remember, this will totally reset your Pirelli Wireless VoIP AG router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Pirelli Wireless VoIP AG

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. We have a Wireless VoIP AG Login Guide with all this information ready for you.

Change Your Password

Be sure to change your router's default password after you get logged back in. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Pirelli Wireless VoIP AG Guides

We have collected a lot of information about the Pirelli Wireless VoIP AG router. You can find some of our additional content here.

This is the reset router guide for the Pirelli Wireless VoIP AG v1. We also have the following guides for the same router: