Setup Router logo in white Setup router name logo in white
Get Software

Reset the PLDT SpeedSurf 504AN

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This is the reset guide for the PLDT SpeedSurf 504AN router. This is not the same thing as rebooting a router. Rebooting a router is simply turning it off and back on again. This is different from a reset because a reset completely erases all settings from the router.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings will be changed in your router:

  • The router's username and password are reset to factory defaults.
  • All WiFi login information and network names are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any port forwards, firewall settings, or parental controls that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other PLDT SpeedSurf 504AN Guides

This is the reset router guide for the PLDT SpeedSurf 504AN. We also have the following guides for the same router:

Recover Password in PLDT SpeedSurf 504AN

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the PLDT SpeedSurf 504AN

Usually there is a reset button located on the back or bottom of a router. Look at your router and try to find something that looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Remember, this will erase everything you have previously done to this PLDT SpeedSurf 504AN router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the PLDT SpeedSurf 504AN

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can follow the SpeedSurf 504AN Login Guide to find everything that you need to log in.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other PLDT SpeedSurf 504AN Guides

We have collected a lot of information about the PLDT SpeedSurf 504AN router. You can find some of our additional content here.

This is the reset router guide for the PLDT SpeedSurf 504AN. We also have the following guides for the same router: