How to change the IP Address on a Rogers AC763S router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Rogers AC763S router.

Other Rogers AC763S Guides

This is the ip address guide for the Rogers AC763S. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Rogers AC763S

To get started configuring the Rogers AC763S LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Rogers AC763S, follow our Rogers AC763S Login Guide.

Change the LAN IP Address on a Rogers AC763S

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Rogers AC763S router.

Now that you have finished logging into the Rogers AC763S and are on the Home page you are ready to change your LAN IP Address, the address you are actually looking at while inside your local network. First, click the choice on the left side of the page labeled Advanced Settings.

A new box appears in the center of the page called Advanced Settings. In this box are more choices at the top, pick the one called Router, then below that, LAN.

Configure the LAN section of your Rogers AC763S

router setup
This is the setup page from your Rogers AC763S router.

Now, on the correct page, place your cursor in the box labeled Router IP Address and enter the new address you have chosen for your Rogers AC763S. One good choice is 192.168.0.1

Nothing else should be changed on this page, simply click Save down at the bottom of the page and you are finished.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Rogers AC763S Info

Don't forget about our other Rogers AC763S info that you might be interested in.

This is the ip address guide for the Rogers AC763S. We also have the following guides for the same router: