Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Sierra Wireless AC763S Rogers router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

This page shows how to change the LAN IP Address on the Sierra Wireless AC763S Rogers router.

Other Sierra Wireless AC763S Rogers Guides

This is the ip address guide for the Sierra Wireless AC763S Rogers. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Sierra Wireless AC763S Rogers

To get started configuring the Sierra Wireless AC763S Rogers LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Sierra Wireless AC763S Rogers, follow our Sierra Wireless AC763S Rogers Login Guide.

Change the LAN IP Address on a Sierra Wireless AC763S Rogers

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Sierra Wireless AC763S Rogers router.

Now that you have logged into the Sierra Wireless AC763S Rogers you are placed on the Home page. To the left is a list of choices you can pick from. Pick the one labeled Advanced Settings.

A new box appears in the center of the screen labeled Advanced Settings. In this box choose the option of Router and below that LAN.

Configure the LAN section of your Sierra Wireless AC763S Rogers

router setup
This is the setup page from your Sierra Wireless AC763S Rogers router.

You are now on the correct page to change your Router's IP Address, this is the address you see while inside your local network. Place your cursor in the box labeled Router IP Address and enter the new address you have picked for your Sierra Wireless AC763S Rogers. We recommend using an address such as 192.168.0.1

You do not need to change anything else on this page. Simply click the button in the lower left corner of the box labeled Save.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Sierra Wireless AC763S Rogers Info

Don't forget about our other Sierra Wireless AC763S Rogers info that you might be interested in.

This is the ip address guide for the Sierra Wireless AC763S Rogers. We also have the following guides for the same router: