Reset the Sierra Wireless AC763S Rogers

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Sierra Wireless AC763S Rogers router to factory default settings. This is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Proceed with caution; resetting your router can be a major headache. When you reset your router, the following will happen.

  • The router's username and password are reset to factory defaults.
  • Your WiFi login, password, and network name are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

A router reset is the last step you should take in recovering your router's password. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Sierra Wireless AC763S Rogers Guides

This is the reset router guide for the Sierra Wireless AC763S Rogers. We also have the following guides for the same router:

Recover Password in Sierra Wireless AC763S Rogers

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Sierra Wireless AC763S Rogers

On most routers you can find a small button on the back or the bottom labeled reset. A typical reset button looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. The lights on the front of the router should do something different when the reset happens. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Just don't forget that this will totally reset your Sierra Wireless AC763S Rogers router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Sierra Wireless AC763S Rogers

Now you need to log in using the factory default username and password. You can find all of the information that you need in our AC763S Rogers Login Guide.

Change Your Password

After logging in, you should really change your router's password for added security. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Sierra Wireless AC763S Rogers Guides

Here are some of our other Sierra Wireless AC763S Rogers guides that you might be interested in.

This is the reset router guide for the Sierra Wireless AC763S Rogers. We also have the following guides for the same router: