Reset the Sitecom 300N X4

In this article, you will learn how to reset your Sitecom 300N X4 back to factory settings. Resetting a router is different than rebooting a router. Unplugging a router from the wall reboots it. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. When you reset your router, the following will happen.

• The router's login credentials are reset to factory defaults.
• All WiFi settings are reset, including network name and password.
• Your ISP username and password will be reset, and you may have to contact your ISP.
• Any firewall settings, parental controls, and port forwards that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Sitecom 300N X4 Guides

Use a VPN

Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

• Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
• Make sure that your VPN provider has lots of exit nodes all around the world.
• Check that your VPN will not affect your speed.
• Verify that your VPN provider uses WireGuard as the underlying protocol.
• Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the reset router guide for the Sitecom 300N X4. We also have the following guides for the same router:

• Sitecom 300N X4 - Setup WiFi on the Sitecom 300N X4
• Sitecom 300N X4 - How to change the IP Address on a Sitecom 300N X4 router
• Sitecom 300N X4 - Sitecom 300N X4 Login Instructions
• Sitecom 300N X4 - Sitecom 300N X4 User Manual
• Sitecom 300N X4 - Sitecom 300N X4 Screenshots
• Sitecom 300N X4 - Information About the Sitecom 300N X4 Router

Recover Password in Sitecom 300N X4

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Sitecom 300N X4

Don't forget to sign up for NordVPN's promo deal before it's gone.

There is usually a small reset button located on either the back or the bottom of a router. Look for something that looks like this:

Reset buttons are usually tiny. Yours may look slightly different than this. You may need a paper clip to push the reset button.

Hold the reset button down for 10 seconds and watch the lights. The lights on the front of the router should do something different when the reset happens. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Don't forget, this step will totally reset your Sitecom 300N X4 router back to factory settings.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the Sitecom 300N X4

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Our 300N X4 Login Guide has all of the information that you need.

Change Your Password

After logging in, you should really change your router's password for added security. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Sitecom 300N X4 Guides

This isn't our only Sitecom 300N X4 guide. We also have the following guides for this router.

This is the reset router guide for the Sitecom 300N X4. We also have the following guides for the same router:

• Sitecom 300N X4 - Setup WiFi on the Sitecom 300N X4
• Sitecom 300N X4 - How to change the IP Address on a Sitecom 300N X4 router
• Sitecom 300N X4 - Sitecom 300N X4 Login Instructions
• Sitecom 300N X4 - Sitecom 300N X4 User Manual
• Sitecom 300N X4 - Sitecom 300N X4 Screenshots
• Sitecom 300N X4 - Information About the Sitecom 300N X4 Router