Setup Router logo in white Setup router name logo in white
Get Software

Reset the Sitecom WL-350

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

In this article, you will learn how to reset your Sitecom WL-350 back to factory settings. A router reset is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: This is not a step to be taken lightly. A router reset will affect the following settings:

  • The router's login credentials are reset.
  • Your WiFi login, password, and network name are reset.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any port forwards, firewall settings, or parental controls that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Sitecom WL-350 Guides

This is the reset router guide for the Sitecom WL-350. We also have the following guides for the same router:

Recover Password in Sitecom WL-350

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Sitecom WL-350

You can usually find a small reset button on either the back or the bottom of a router. Look at your router and try to find something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The lights on the front of the router should do something different when the reset happens. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Don't forget, this step will totally reset your Sitecom WL-350 router back to factory settings.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Sitecom WL-350

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Just follow our WL-350 Login Guide to find all of the information that you need.

Change Your Password

Be sure to change your router's default password after you get logged back in. It is a huge security risk to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Sitecom WL-350 Guides

Here are some of our other Sitecom WL-350 guides that you might be interested in.

This is the reset router guide for the Sitecom WL-350. We also have the following guides for the same router: