Setup Router logo in white Setup router name logo in white
Get Software

Setup WiFi on the Sitecom WL-350

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

The Sitecom WL-350 router is considered a wireless router because it offers WiFi connectivity. WiFi, or simply wireless, allows you to connect various devices to your router, such as wireless printers, smart televisions, and WiFi enabled smartphones.

Other Sitecom WL-350 Guides

This is the wifi guide for the Sitecom WL-350. We also have the following guides for the same router:

WiFi Terms

Before we get started there is a little bit of background info that you should be familiar with.

Wireless Name

Your wireless network needs to have a name to uniquely identify it from other wireless networks. If you are not sure what this means we have a guide explaining what a wireless name is that you can read for more information.

Wireless Password

An important part of securing your wireless network is choosing a strong password.

Wireless Channel

Picking a WiFi channel is not always a simple task. Be sure to read about WiFi channels before making the choice.

Encryption

You should almost definitely pick WPA2 for your networks encryption. If you are unsure, be sure to read our WEP vs WPA guide first.

Login To The Sitecom WL-350

To get started configuring the Sitecom WL-350 WiFi settings you need to login to your router. If you are already logged in you can skip this step.

To login to the Sitecom WL-350, follow our Sitecom WL-350 Login Guide.

Find the WiFi Settings on the Sitecom WL-350

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Sitecom WL-350 router.

This wireless setup guide begins on the Device Information page of the Sitecom WL-350 router. Start by clicking the option of Basic at the top of the page. Then another set of tabs appears below that, select Wireless 2.4Ghz.

Change the WiFi Settings on the Sitecom WL-350

wifi wireless
This is the wifi setup page from your Sitecom WL-350 router.

The first thing that needs to be changed is titled Wireless Channel. Make sure you are using channels 1,6, or 11. Find out why these three channels are important, check out our guide on the topic.

Now scroll down to the Wireless Network 1 and place a check mark in the box labeled Enable.

Below that is the Name (SSID). This is the network ID and should be unique to you. Create a name here that doesn't include the router name or any of your personal information. Learn more about this in our Wireless Name Guide.

Next, set the Security Mode to WPA-Personal.

Set the WPA Mode next. For the best security choose the option here of WPA2 Only. To find out why this is the best option, click this link.

The Cipher Type needs to be set to AES.

Finally you need to set the Pass-phrase or Pre-Shared Key. This is the internet password and should be strong to prevent intruders. Go ahead and enter 14-20 characters password. To make your password strong don't forget to use some symbols, numbers, and capital letters in this new password. We have more ideas in our Password Guide.

When you are finished, be sure to click the Save button.

Possible Problems when Changing your WiFi Settings

After making these changes to your router you will almost definitely have to reconnect any previously connected devices. This is usually done at the device itself and not at your computer.

Other Sitecom WL-350 Info

Don't forget about our other Sitecom WL-350 info that you might be interested in.

This is the wifi guide for the Sitecom WL-350. We also have the following guides for the same router: