Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Technicolor TC7110 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Technicolor TC7110 router.

Other Technicolor TC7110 Guides

This is the ip address guide for the Technicolor TC7110. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Technicolor TC7110

To get started configuring the Technicolor TC7110 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Technicolor TC7110, follow our Technicolor TC7110 Login Guide.

Change the LAN IP Address on a Technicolor TC7110

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Technicolor TC7110 router.

Let's begin this guide on the Gateway Status page of the Technicolor TC7110. From there select Network at the top of the page. Then in the left sidebar select LAN.

Configure the LAN section of your Technicolor TC7110

router IP address lan home network
This is the lan page from your Technicolor TC7110 router.

You are now able to change the router's internal IP address. Use the space titled IP Address and enter the new address you have chosen for your router. We recommend ending this address in a one such as 10.0.0.1 or 192.168.1.1

Make no other changes to this page. Just click the Apply button before you exit.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Technicolor TC7110 Info

Don't forget about our other Technicolor TC7110 info that you might be interested in.

This is the ip address guide for the Technicolor TC7110. We also have the following guides for the same router: