Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Telewell TW-EAV510v2 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Telewell TW-EAV510v2 router.

Other Telewell TW-EAV510v2 Guides

This is the ip address guide for the Telewell TW-EAV510v2 2.32c.7-12. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Telewell TW-EAV510v2

To get started configuring the Telewell TW-EAV510v2 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Telewell TW-EAV510v2, follow our Telewell TW-EAV510v2 Login Guide.

Change the LAN IP Address on a Telewell TW-EAV510v2

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Telewell TW-EAV510v2 router.

This guide starts on the Home page of the Telewell TW-EAV510v2 router. To change your router's IP address click Configuration on the left hand side of the page. Below that click LAN and then Ethernet.

Configure the LAN section of your Telewell TW-EAV510v2

router IP address lan home network
This is the lan page from your Telewell TW-EAV510v2 router.

You should now be on the page you see above.

This page gives you the option to change your router's IP Address. Not quite sure what you should change it to? One good option is 10.0.0.1

Below that you'll see the Subnet Mask. Don't change this. It needs to stay at 255.255.255.0

That's all there is to it. Just be sure to click Apply before leaving the page.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Telewell TW-EAV510v2 Info

Don't forget about our other Telewell TW-EAV510v2 info that you might be interested in.

This is the ip address guide for the Telewell TW-EAV510v2 2.32c.7-12. We also have the following guides for the same router: