Setup Router logo in white Setup router name logo in white
Get Software

Reset the Telewell TW-EAV510v2

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This is the reset guide for the Telewell TW-EAV510v2 router. This is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. This is different from a reset because a reset completely erases all settings from the router.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. A router reset will affect the following settings:

  • The router's username and password are reset to factory defaults.
  • Your WiFi login, password, and network name are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any port forwards, firewall settings, or parental controls that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Telewell TW-EAV510v2 Guides

This is the reset router guide for the Telewell TW-EAV510v2. We also have the following guides for the same router:

Recover Password in Telewell TW-EAV510v2

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Telewell TW-EAV510v2

You can usually find a small reset button on either the back or the bottom of a router. Most reset buttons look like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The lights on the front of the router should do something different when the reset happens. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Just don't forget that this will totally reset your Telewell TW-EAV510v2 router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Telewell TW-EAV510v2

After you are finished resetting your router, you need to login in using the original factory username and password. You can follow the TW-EAV510v2 Login Guide to find everything that you need to log in.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Telewell TW-EAV510v2 Guides

This isn't our only Telewell TW-EAV510v2 guide. We also have the following guides for this router.

This is the reset router guide for the Telewell TW-EAV510v2. We also have the following guides for the same router: