This page shows how to change the LAN IP Address on the Tenda W302R router.
Other Tenda W302R Guides
This is the ip address guide for the Tenda W302R. We also have the following guides for the same router:
- Tenda W302R - Tenda W302R User Manual
- Tenda W302R - Tenda W302R Login Instructions
- Tenda W302R - How to change the DNS settings on a Tenda W302R router
- Tenda W302R - Setup WiFi on the Tenda W302R
- Tenda W302R - Information About the Tenda W302R Router
- Tenda W302R - Tenda W302R Screenshots
- Tenda W302R - Reset the Tenda W302R
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Tenda W302R
To get started configuring the Tenda W302R LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Tenda W302R, follow our Tenda W302R Login Guide.
Change the LAN IP Address on a Tenda W302R
If you followed our login guide above then you should see this screen.
When you want to change your IP Address, the address you see from inside your network, log into the Tenda W302R. This takes you to the Network Status page. Next, click the choice on the left in the grey bar labeled Advanced Settings, then LAN Settings.
Configure the LAN section of your Tenda W302R
There are two things you can do on this page. The first is the IP Address, go ahead and enter your new address you have picked out for your Router. We recommend that you use 192.168.0.1 The other box on this page is the Subnet Mask, this should in most cases remain at 255.255.255.0
Finally, when you are done click Apply.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Tenda W302R Info
Don't forget about our other Tenda W302R info that you might be interested in.
This is the ip address guide for the Tenda W302R. We also have the following guides for the same router:
- Tenda W302R - Tenda W302R User Manual
- Tenda W302R - Tenda W302R Login Instructions
- Tenda W302R - How to change the DNS settings on a Tenda W302R router
- Tenda W302R - Setup WiFi on the Tenda W302R
- Tenda W302R - Information About the Tenda W302R Router
- Tenda W302R - Tenda W302R Screenshots
- Tenda W302R - Reset the Tenda W302R