This page shows how to change the LAN IP Address on the Tenda W541R router.
Other Tenda W541R Guides
This is the ip address guide for the Tenda W541R. We also have the following guides for the same router:
- Tenda W541R - Tenda W541R User Manual
- Tenda W541R - Tenda W541R Login Instructions
- Tenda W541R - How to change the DNS settings on a Tenda W541R router
- Tenda W541R - Setup WiFi on the Tenda W541R
- Tenda W541R - Information About the Tenda W541R Router
- Tenda W541R - Tenda W541R Screenshots
- Tenda W541R - Reset the Tenda W541R
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Tenda W541R
To get started configuring the Tenda W541R LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Tenda W541R, follow our Tenda W541R Login Guide.
Change the LAN IP Address on a Tenda W541R
If you followed our login guide above then you should see this screen.
Once you have logged into the Tenda W541R you are going to start on the Welcome page of this Router. To change your LAN IP Address, the address you are looking at while inside your network, click the choice on the left in the blue bar, labeled Advanced Config then LAN Setting.
Configure the LAN section of your Tenda W541R
On this page, the only thing you are able to change is the IP Address. Place your cursor in the box labeled IP Address and enter your new address you have picked out for your Router. One good choice is 192.168.0.1
When you are finished, make sure to click the Save button before you exit.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Tenda W541R Info
Don't forget about our other Tenda W541R info that you might be interested in.
This is the ip address guide for the Tenda W541R. We also have the following guides for the same router:
- Tenda W541R - Tenda W541R User Manual
- Tenda W541R - Tenda W541R Login Instructions
- Tenda W541R - How to change the DNS settings on a Tenda W541R router
- Tenda W541R - Setup WiFi on the Tenda W541R
- Tenda W541R - Information About the Tenda W541R Router
- Tenda W541R - Tenda W541R Screenshots
- Tenda W541R - Reset the Tenda W541R