Setup Router logo in white Setup router name logo in white
Get Software

Reset the TP-Link Archer A7 v5.0

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 5 minutes

This is the reset guide for the TP-Link Archer A7 v5.0 router. Resetting a router is different than rebooting a router. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings will be changed in your router:

  • The router's login and password are reset.
  • Your WiFi name and password are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any port forwards, firewall settings, or parental controls that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other TP-Link Archer A7 v5.0 Guides

This is the reset router guide for the TP-Link Archer A7 v5.0 1.1.2. We also have the following guides for the same router:

Recover Password in TP-Link Archer A7 v5.0

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the TP-Link Archer A7 v5.0

Most of the time you can find a small reset button located on either the back or the bottom of a router. What you are looking for is something that looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The lights on the front of the router should do something different when the reset happens. Do not worry about holding the button down too long; this is harmless.

Remember, this will totally reset your TP-Link Archer A7 v5.0 router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the TP-Link Archer A7 v5.0

Now you need to log in using the factory default username and password. You can find all of the information that you need in our Archer A7 v5.0 Login Guide.

Change Your Password

You need to change your router's default password after you log in for the first time. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other TP-Link Archer A7 v5.0 Guides

We have collected a lot of information about the TP-Link Archer A7 v5.0 router. You can find some of our additional content here.

This is the reset router guide for the TP-Link Archer A7 v5.0 1.1.2. We also have the following guides for the same router: