This is the reset guide for the TP-Link Archer C2600 router. Resetting a router is different than rebooting a router. Rebooting a router is simply turning it off and back on again. However, when you reset a router you, return it back to its factory default settings.
Warning: Make sure that you fully understand the following before resetting your router. A router reset will affect the following settings:
- The router's login and password are reset.
- All WiFi settings are reset, including network name and password.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other TP-Link Archer C2600 Guides
This is the reset router guide for the TP-Link Archer C2600. We also have the following guides for the same router:
Recover Password in TP-Link Archer C2600
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the TP-Link Archer C2600
Most routers have a small button on either the back or the bottom. Look for something that looks like this:
Even though yours may look slightly different, you need to look for a tiny button. You may need a paper clip to push the reset button.
Hold the reset button down for 10 seconds and watch the lights. After a few seconds the lights should blink differently. When this happens, the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Just don't forget that this will totally reset your TP-Link Archer C2600 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the TP-Link Archer C2600
Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a Archer C2600 Login Guide with all this information ready for you.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other TP-Link Archer C2600 Guides
Here are some of our other TP-Link Archer C2600 guides that you might be interested in.
This is the reset router guide for the TP-Link Archer C2600. We also have the following guides for the same router: