This article covers how to reset the TP-Link Archer C7 v2 router back to factory default settings. Resetting a router is different than rebooting a router. A reboot happens every time a router loses power. However, when you reset a router you, return it back to its factory default settings.
Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:
- The router's login and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
A router reset is the last step you should take in recovering your router's password. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other TP-Link Archer C7 v2 Guides
This is the reset router guide for the TP-Link Archer C7 v2 3.15.3. We also have the following guides for the same router:
- TP-Link Archer C7 v2 - Reset the TP-Link Archer C7 v2
- TP-Link Archer C7 v2 - TP-Link Archer C7 v2 User Manual
- TP-Link Archer C7 v2 - TP-Link Archer C7 v2 Login Instructions
- TP-Link Archer C7 v2 - TP-Link Archer C7 v2 Screenshots
- TP-Link Archer C7 v2 - Information About the TP-Link Archer C7 v2 Router
Recover Password in TP-Link Archer C7 v2
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
A router reset should be the last thing you try if you are unable to login.
Reset the TP-Link Archer C7 v2
Most routers have a small button on either the back or the bottom. This is what a typical reset button looks like:
Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not worry about holding the button down too long; this is harmless.
Remember, this will totally reset your TP-Link Archer C7 v2 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the TP-Link Archer C7 v2
Once the reset is complete, you need to login to your router using the default IP address, username, and password. Our Archer C7 v2 Login Guide has all of the information that you need.
Change Your Password
After logging in, you should really change your router's password for added security. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other TP-Link Archer C7 v2 Guides
If you want additional help with your TP-Link Archer C7 v2 be sure to check out some of our other guides.
This is the reset router guide for the TP-Link Archer C7 v2 3.15.3. We also have the following guides for the same router:
- TP-Link Archer C7 v2 - Reset the TP-Link Archer C7 v2
- TP-Link Archer C7 v2 - TP-Link Archer C7 v2 User Manual
- TP-Link Archer C7 v2 - TP-Link Archer C7 v2 Login Instructions
- TP-Link Archer C7 v2 - TP-Link Archer C7 v2 Screenshots
- TP-Link Archer C7 v2 - Information About the TP-Link Archer C7 v2 Router