How to change the IP Address on a TP-Link Archer D7 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the TP-Link Archer D7 router.

Other TP-Link Archer D7 Guides

This is the ip address guide for the TP-Link Archer D7.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The TP-Link Archer D7

To get started configuring the TP-Link Archer D7 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the TP-Link Archer D7, follow our TP-Link Archer D7 Login Guide.

Change the LAN IP Address on a TP-Link Archer D7

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your TP-Link router.

We begin this guide on the Home page of the TP-Link Archer D7 router. To change your IP address click the Advanced tab near the top of the screen. From there click Network and then LAN Settings located in the left hand sidebar.

Configure the LAN section of your TP-Link Archer D7

router DHCP lan mac address binding internet settings
This is the dhcp page from your TP-Link router.

This brings you to a new page.

You can now change your router's IP Address. Enter your new address into the given box. Not sure what you should change it to? One good option to try is 10.0.0.1

Just beneath that is the Subnet Mask. However it's important that this be left alone. Leave it at 255.255.255.0

That's it! Just don't forget to click Save before leaving the page.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other TP-Link Archer D7 Info

Don't forget about our other TP-Link Archer D7 info that you might be interested in.

This is the ip address guide for the TP-Link Archer D7.We also have the following guides for the same router: