Setup Router logo in white Setup router name logo in white
Get Software

Reset the Trendnet TEW-632BRP

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This article covers how to reset the Trendnet TEW-632BRP router back to factory default settings. This is not the same thing as rebooting a router. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:

  • The router's username and password are reset to factory defaults.
  • All WiFi login information and network names are reset.
  • Your ISP username and password will be reset, and you may have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Trendnet TEW-632BRP Guides

This is the reset router guide for the Trendnet TEW-632BRP v2. We also have the following guides for the same router:

Recover Password in Trendnet TEW-632BRP

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Trendnet TEW-632BRP

On most routers you can find a small button on the back or the bottom labeled reset. A typical reset button looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Don't forget, this step will totally reset your Trendnet TEW-632BRP router back to factory settings.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Trendnet TEW-632BRP

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. We have a TEW-632BRP Login Guide with all this information ready for you.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Trendnet TEW-632BRP Guides

This isn't our only Trendnet TEW-632BRP guide. We also have the following guides for this router.

This is the reset router guide for the Trendnet TEW-632BRP v2. We also have the following guides for the same router: