This is the reset guide for the Ubee DDW 336 router. A router reset is very different than a router reboot. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.
- The router's username and password are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Ubee DDW 336 Guides
This is the reset router guide for the Ubee DDW 336. We also have the following guides for the same router:
Recover Password in Ubee DDW 336
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Ubee DDW 336
On most routers you can find a small button on the back or the bottom labeled reset. This is what a typical reset button looks like:
Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Don't forget, this step will totally reset your Ubee DDW 336 router back to factory settings.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Ubee DDW 336
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Just follow our DDW 336 Login Guide to find all of the information that you need.
Change Your Password
After logging in, you should really change your router's password for added security. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Ubee DDW 336 Guides
This isn't our only Ubee DDW 336 guide. We also have the following guides for this router.
This is the reset router guide for the Ubee DDW 336. We also have the following guides for the same router: