This page shows how to change the LAN IP Address on the UStec TP-IPR8 router.
Other UStec TP-IPR8 Guides
This is the ip address guide for the UStec TP-IPR8. We also have the following guides for the same router:
- UStec TP-IPR8 - Reset the UStec TP-IPR8
- UStec TP-IPR8 - UStec TP-IPR8 User Manual
- UStec TP-IPR8 - UStec TP-IPR8 Login Instructions
- UStec TP-IPR8 - How to change the DNS settings on a UStec TP-IPR8 router
- UStec TP-IPR8 - Information About the UStec TP-IPR8 Router
- UStec TP-IPR8 - UStec TP-IPR8 Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The UStec TP-IPR8
To get started configuring the UStec TP-IPR8 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the UStec TP-IPR8, follow our UStec TP-IPR8 Login Guide.
Change the LAN IP Address on a UStec TP-IPR8
If you followed our login guide above then you should see this screen.
For this Router, you will first log into the UStec TP-IPR8, which puts you on the Main Menu. Click Advanced Setup, then on the left side of the new page, LAN, and finally LAN Settings.
Configure the LAN section of your UStec TP-IPR8
You are now on the correct page to change your IP Address, this is the address you see when inside your network. Place your cursor in the first box labeled IP Address and enter the new one you have picked out for your UStec Router. Our suggestion is 192.168.0.1
Make sure that while you make this change, you do not change the Subnet Mask, this should be kept at 255.255.255.0
Finally, click Apply.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other UStec TP-IPR8 Info
Don't forget about our other UStec TP-IPR8 info that you might be interested in.
This is the ip address guide for the UStec TP-IPR8. We also have the following guides for the same router:
- UStec TP-IPR8 - Reset the UStec TP-IPR8
- UStec TP-IPR8 - UStec TP-IPR8 User Manual
- UStec TP-IPR8 - UStec TP-IPR8 Login Instructions
- UStec TP-IPR8 - How to change the DNS settings on a UStec TP-IPR8 router
- UStec TP-IPR8 - Information About the UStec TP-IPR8 Router
- UStec TP-IPR8 - UStec TP-IPR8 Screenshots