Reset the UStec TP-IPR8

If you need to reset your UStec TP-IPR8 router back to factory settings, then this article shows you how. Resetting a router is different than rebooting a router. Unplugging a router from the wall reboots it. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: This is not a step to be taken lightly. When you reset your router, the following will happen.

• The router's username and password are reset.
• All WiFi information such as network name, password, and authentication method are erased.
• If your router has any ISP settings they will be removed, and you will have to contact your ISP.
• Any firewall settings, parental controls, and port forwards that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.

Other UStec TP-IPR8 Guides

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

• Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
• Make sure that your VPN provider has lots of exit nodes all around the world.
• Check that your VPN will not affect your speed.
• Verify that your VPN provider uses WireGuard as the underlying protocol.
• Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the reset router guide for the UStec TP-IPR8. We also have the following guides for the same router:

• UStec TP-IPR8 - How to change the IP Address on a UStec TP-IPR8 router
• UStec TP-IPR8 - UStec TP-IPR8 User Manual
• UStec TP-IPR8 - UStec TP-IPR8 Login Instructions
• UStec TP-IPR8 - How to change the DNS settings on a UStec TP-IPR8 router
• UStec TP-IPR8 - Information About the UStec TP-IPR8 Router
• UStec TP-IPR8 - UStec TP-IPR8 Screenshots

Recover Password in UStec TP-IPR8

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the UStec TP-IPR8

Don't forget to sign up for NordVPN's promo deal before it's gone.

You can usually find a small reset button on either the back or the bottom of a router. Look at your router and try to find something that looks like this:

Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Hold the reset button down for 10 seconds and watch the lights. After a few seconds the lights should blink differently. When this happens, the reset is complete. You can hold the button down as long as you like, it will not hurt anything.

Just don't forget that this will totally reset your UStec TP-IPR8 router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the UStec TP-IPR8

Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a TP-IPR8 Login Guide with all this information ready for you.

Change Your Password

You need to change your router's default password after you log in for the first time. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other UStec TP-IPR8 Guides

We have collected a lot of information about the UStec TP-IPR8 router. You can find some of our additional content here.

This is the reset router guide for the UStec TP-IPR8. We also have the following guides for the same router:

• UStec TP-IPR8 - How to change the IP Address on a UStec TP-IPR8 router
• UStec TP-IPR8 - UStec TP-IPR8 User Manual
• UStec TP-IPR8 - UStec TP-IPR8 Login Instructions
• UStec TP-IPR8 - How to change the DNS settings on a UStec TP-IPR8 router
• UStec TP-IPR8 - Information About the UStec TP-IPR8 Router
• UStec TP-IPR8 - UStec TP-IPR8 Screenshots