In this article, you will learn how to reset your V-Link VLR-1505n back to factory settings. This is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. However, when you reset a router you, return it back to its factory default settings.
Warning: Make sure that you fully understand the following before resetting your router. When you reset your router, the following will happen.
- The router's login and password are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other V-Link VLR-1505n Guides
This is the reset router guide for the V-Link VLR-1505n. We also have the following guides for the same router:
Recover Password in V-Link VLR-1505n
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the V-Link VLR-1505n
On most routers you can find a small button on the back or the bottom labeled reset. Look for something that looks like this:
Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The lights on the front of the router should do something different when the reset happens. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Keep in mind that this will completely reset your V-Link VLR-1505n router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the V-Link VLR-1505n
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. We have a VLR-1505n Login Guide with all this information ready for you.
Change Your Password
Be sure to change your router's default password after you get logged back in. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other V-Link VLR-1505n Guides
This isn't our only V-Link VLR-1505n guide. We also have the following guides for this router.
This is the reset router guide for the V-Link VLR-1505n. We also have the following guides for the same router: