This page shows how to change the LAN IP Address on the Vizio XWR100 router.
Other Vizio XWR100 Guides
This is the ip address guide for the Vizio XWR100. We also have the following guides for the same router:
- Vizio XWR100 - Reset the Vizio XWR100
- Vizio XWR100 - Vizio XWR100 User Manual
- Vizio XWR100 - Vizio XWR100 Login Instructions
- Vizio XWR100 - How to change the DNS settings on a Vizio XWR100 router
- Vizio XWR100 - Setup WiFi on the Vizio XWR100
- Vizio XWR100 - Information About the Vizio XWR100 Router
- Vizio XWR100 - Vizio XWR100 Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Vizio XWR100
To get started configuring the Vizio XWR100 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Vizio XWR100, follow our Vizio XWR100 Login Guide.
Change the LAN IP Address on a Vizio XWR100
If you followed our login guide above then you should see this screen.
Once you have finished logging into the Vizio XWR100 you should begin on the Home page of this Router. First click the middle button labeled Router. Then choose LAN SETTINGS. This should place you on the correct page to change your Router IP Address, the address you see when on the inside of the network.
Configure the LAN section of your Vizio XWR100
The very first option on this page is labeled Router IP. Enter your new address in these boxes. One good suggestion is the use of an address such as 192.168.1.1
Make sure you do not change the Subnet Mask, this should remain at 255.255.255.0
When you are done, be sure and save your changes.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Vizio XWR100 Info
Don't forget about our other Vizio XWR100 info that you might be interested in.
This is the ip address guide for the Vizio XWR100. We also have the following guides for the same router:
- Vizio XWR100 - Reset the Vizio XWR100
- Vizio XWR100 - Vizio XWR100 User Manual
- Vizio XWR100 - Vizio XWR100 Login Instructions
- Vizio XWR100 - How to change the DNS settings on a Vizio XWR100 router
- Vizio XWR100 - Setup WiFi on the Vizio XWR100
- Vizio XWR100 - Information About the Vizio XWR100 Router
- Vizio XWR100 - Vizio XWR100 Screenshots