How to change the IP Address on a ZTE ZXHN H108N Telkom router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the ZTE ZXHN H108N Telkom router.

Other ZTE ZXHN H108N Telkom Guides

This is the ip address guide for the ZTE ZXHN H108N Telkom.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The ZTE ZXHN H108N Telkom

To get started configuring the ZTE ZXHN H108N Telkom LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the ZTE ZXHN H108N Telkom, follow our ZTE ZXHN H108N Telkom Login Guide.

Change the LAN IP Address on a ZTE ZXHN H108N Telkom

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your ZTE router.

We begin this guide on the Home page of the ZTE ZXHN H108N Telkom router. Want to change your IP address but not quite sure how? Not to fear; we've got the steps covered.

Start off by clicking Interface Setup near the top of the page. Then click LAN just below that.

Configure the LAN section of your ZTE ZXHN H108N Telkom

router IP address lan home network
This is the lan page from your ZTE router.

This takes you to the page you see above.

On this page you can change your router's Main IP Address. Enter your desired address into the provided box. Not sure what you should change it to? One good choice is 10.0.0.1

Just beneath that you'll see the Main Subnet Mask. However be sure to leave this alone. It needs to stay at 255.255.255.0

That's it! You're done. Just be sure to Save your changes before closing the page.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other ZTE ZXHN H108N Telkom Info

Don't forget about our other ZTE ZXHN H108N Telkom info that you might be interested in.

This is the ip address guide for the ZTE ZXHN H108N Telkom.We also have the following guides for the same router: