Setup Router logo in white Setup router name logo in white
Get Software

Reset the ZTE ZXHN H108N Telkom

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This article covers how to reset the ZTE ZXHN H108N Telkom router back to factory default settings. This is a much bigger deal than a router reboot. Every time your router loses power it reboots. A Router Reset completely erases the router and returns it to factory settings.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings will be changed in your router:

  • The router's username and password are reset.
  • All WiFi settings are reset, including network name and password.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other ZTE ZXHN H108N Telkom Guides

This is the reset router guide for the ZTE ZXHN H108N Telkom. We also have the following guides for the same router:

Recover Password in ZTE ZXHN H108N Telkom

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the ZTE ZXHN H108N Telkom

Usually there is a reset button located on the back or bottom of a router. Look for something that looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. It is harmless to hold the reset button too long.

Keep in mind that this will completely reset your ZTE ZXHN H108N Telkom router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the ZTE ZXHN H108N Telkom

After you are finished resetting your router, you need to login in using the original factory username and password. You can follow the ZXHN H108N Telkom Login Guide to find everything that you need to log in.

Change Your Password

Be sure to change your router's default password after you get logged back in. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other ZTE ZXHN H108N Telkom Guides

We have collected a lot of information about the ZTE ZXHN H108N Telkom router. You can find some of our additional content here.

This is the reset router guide for the ZTE ZXHN H108N Telkom. We also have the following guides for the same router: