Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a ZyXEL NBG-419N router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the ZyXEL NBG-419N router.

Other ZyXEL NBG-419N Guides

This is the ip address guide for the ZyXEL NBG-419N. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The ZyXEL NBG-419N

To get started configuring the ZyXEL NBG-419N LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the ZyXEL NBG-419N, follow our ZyXEL NBG-419N Login Guide.

Change the LAN IP Address on a ZyXEL NBG-419N

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your ZyXEL NBG-419N router.

When you decide to change your Router IP Address, the address you see when inside your local network, first you need to log into the ZyXEL NBG-419N. This places you on the Home page of your Router. Second, click the Status button on the right side of the screen. This opens a new page, with choices on the left side of the screen. Click the picture that looks like two gears, this is the Configuration tab. Next, click LAN, which is under the heading of Network. Finally, click the tab in the middle section of the screen labeled IP.

Configure the LAN section of your ZyXEL NBG-419N

router setup
This is the setup page from your ZyXEL NBG-419N router.

On this new page, place your cursor in the box labeled IP Address and enter the new one you have picked out for your Router. One option is the address of 192.168.0.1

Be sure that you leave the IP Subnet Mask at 255.255.255.0

Once you have finished, don't forget to save by clicking the button on the bottom of the page labeled Apply.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other ZyXEL NBG-419N Info

Don't forget about our other ZyXEL NBG-419N info that you might be interested in.

This is the ip address guide for the ZyXEL NBG-419N. We also have the following guides for the same router: