In this article, you will learn how to reset your ZyXEL P 660H T3 back to factory settings. A router reset is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. A Router Reset completely erases the router and returns it to factory settings.
Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:
- The router's login credentials are reset.
- Your WiFi name and password are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any parental controls, firewall settings, or port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.
Other ZyXEL P 660H T3 Guides
This is the reset router guide for the ZyXEL P 660H T3. We also have the following guides for the same router:
- ZyXEL P 660H T3 - How to change the IP Address on a ZyXEL P 660H T3 router
- ZyXEL P 660H T3 - ZyXEL P 660H T3 User Manual
- ZyXEL P 660H T3 - ZyXEL P 660H T3 Login Instructions
- ZyXEL P 660H T3 - How to change the DNS settings on a ZyXEL P 660H T3 router
- ZyXEL P 660H T3 - Information About the ZyXEL P 660H T3 Router
- ZyXEL P 660H T3 - ZyXEL P 660H T3 Screenshots
Recover Password in ZyXEL P 660H T3
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the ZyXEL P 660H T3
On most routers you can find a small button on the back or the bottom labeled reset. This is what a typical reset button looks like:
Yours may look slightly different, but they are usually tiny. You may need a paper clip to push the reset button.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not worry about holding the button down too long; this is harmless.
Keep in mind that this will completely reset your ZyXEL P 660H T3 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the ZyXEL P 660H T3
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Our P 660H T3 Login Guide has all of the information that you need.
Change Your Password
After logging in, you should really change your router's password for added security. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other ZyXEL P 660H T3 Guides
Here are some of our other ZyXEL P 660H T3 guides that you might be interested in.
This is the reset router guide for the ZyXEL P 660H T3. We also have the following guides for the same router:
- ZyXEL P 660H T3 - How to change the IP Address on a ZyXEL P 660H T3 router
- ZyXEL P 660H T3 - ZyXEL P 660H T3 User Manual
- ZyXEL P 660H T3 - ZyXEL P 660H T3 Login Instructions
- ZyXEL P 660H T3 - How to change the DNS settings on a ZyXEL P 660H T3 router
- ZyXEL P 660H T3 - Information About the ZyXEL P 660H T3 Router
- ZyXEL P 660H T3 - ZyXEL P 660H T3 Screenshots