This guide shows you how to reset your ZyXEL P 660RU T1 router. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. However, when you reset a router you, return it back to its factory default settings.
Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:
- The router's username and password are reset.
- Your WiFi login, password, and network name are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other ZyXEL P 660RU T1 Guides
This is the reset router guide for the ZyXEL P 660RU T1. We also have the following guides for the same router:
- ZyXEL P 660RU T1 - How to change the IP Address on a ZyXEL P 660RU T1 router
- ZyXEL P 660RU T1 - ZyXEL P 660RU T1 User Manual
- ZyXEL P 660RU T1 - ZyXEL P 660RU T1 Login Instructions
- ZyXEL P 660RU T1 - How to change the DNS settings on a ZyXEL P 660RU T1 router
- ZyXEL P 660RU T1 - Information About the ZyXEL P 660RU T1 Router
- ZyXEL P 660RU T1 - ZyXEL P 660RU T1 Screenshots
Recover Password in ZyXEL P 660RU T1
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the ZyXEL P 660RU T1
Most of the time you can find a small reset button located on either the back or the bottom of a router. Most reset buttons look like this:
Your reset button may look different, but usually they are very small. You may need a paper clip to push the reset button.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Remember, this will totally reset your ZyXEL P 660RU T1 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the ZyXEL P 660RU T1
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can find all of the information that you need in our P 660RU T1 Login Guide.
Change Your Password
After logging in, you should really change your router's password for added security. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other ZyXEL P 660RU T1 Guides
If you want additional help with your ZyXEL P 660RU T1 be sure to check out some of our other guides.
This is the reset router guide for the ZyXEL P 660RU T1. We also have the following guides for the same router:
- ZyXEL P 660RU T1 - How to change the IP Address on a ZyXEL P 660RU T1 router
- ZyXEL P 660RU T1 - ZyXEL P 660RU T1 User Manual
- ZyXEL P 660RU T1 - ZyXEL P 660RU T1 Login Instructions
- ZyXEL P 660RU T1 - How to change the DNS settings on a ZyXEL P 660RU T1 router
- ZyXEL P 660RU T1 - Information About the ZyXEL P 660RU T1 Router
- ZyXEL P 660RU T1 - ZyXEL P 660RU T1 Screenshots