If you need to reset your ZyXEL P8702N router back to factory settings, then this article shows you how. A router reset is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. A Router Reset completely erases the router and returns it to factory settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. When you reset your router, the following will happen.
- The router's login credentials are reset to factory defaults.
- Your WiFi name and password are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other ZyXEL P8702N Guides
This is the reset router guide for the ZyXEL P8702N 1.00 (NO) Telenor. We also have the following guides for the same router:
Recover Password in ZyXEL P8702N
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the ZyXEL P8702N
There is usually a small reset button located on either the back or the bottom of a router. What you are looking for is something that looks like this:
Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Remember, this will erase everything you have previously done to this ZyXEL P8702N router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the ZyXEL P8702N
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Our P8702N Login Guide has all of the information that you need.
Change Your Password
After logging in, you should really change your router's password for added security. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other ZyXEL P8702N Guides
Here are some of our other ZyXEL P8702N guides that you might be interested in.
This is the reset router guide for the ZyXEL P8702N 1.00 (NO) Telenor. We also have the following guides for the same router: