In this article, you will learn how to reset your ZyXEL VMG8324 B10A back to factory settings. A router reset is very different than a router reboot. Turning a router off and back on again causes a reboot. However, when you reset a router you, return it back to its factory default settings.
Warning: Proceed with caution; resetting your router can be a major headache. When you reset your router, the following will happen.
- The router's login credentials are reset.
- All WiFi login information and network names are reset.
- All ISP settings will reset to default, and you may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other ZyXEL VMG8324 B10A Guides
This is the reset router guide for the ZyXEL VMG8324 B10A. We also have the following guides for the same router:
- ZyXEL VMG8324 B10A - How to change the IP Address on a ZyXEL VMG8324 B10A router
- ZyXEL VMG8324 B10A - ZyXEL VMG8324 B10A Login Instructions
- ZyXEL VMG8324 B10A - ZyXEL VMG8324 B10A User Manual
- ZyXEL VMG8324 B10A - Setup WiFi on the ZyXEL VMG8324 B10A
- ZyXEL VMG8324 B10A - ZyXEL VMG8324 B10A Screenshots
- ZyXEL VMG8324 B10A - Information About the ZyXEL VMG8324 B10A Router
Recover Password in ZyXEL VMG8324 B10A
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the ZyXEL VMG8324 B10A
Usually there is a reset button located on the back or bottom of a router. Most reset buttons look like this:
Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not worry about holding the button down too long; this is harmless.
Just don't forget that this will totally reset your ZyXEL VMG8324 B10A router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the ZyXEL VMG8324 B10A
After you are finished resetting your router, you need to login in using the original factory username and password. Just follow our VMG8324 B10A Login Guide to find all of the information that you need.
Change Your Password
You need to change your router's default password after you log in for the first time. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other ZyXEL VMG8324 B10A Guides
If you want additional help with your ZyXEL VMG8324 B10A be sure to check out some of our other guides.
This is the reset router guide for the ZyXEL VMG8324 B10A. We also have the following guides for the same router:
- ZyXEL VMG8324 B10A - How to change the IP Address on a ZyXEL VMG8324 B10A router
- ZyXEL VMG8324 B10A - ZyXEL VMG8324 B10A Login Instructions
- ZyXEL VMG8324 B10A - ZyXEL VMG8324 B10A User Manual
- ZyXEL VMG8324 B10A - Setup WiFi on the ZyXEL VMG8324 B10A
- ZyXEL VMG8324 B10A - ZyXEL VMG8324 B10A Screenshots
- ZyXEL VMG8324 B10A - Information About the ZyXEL VMG8324 B10A Router