Setup Router logo in white Setup router name logo in white
Get Software

Reset the ZyXEL ZyWALL Z 70 UTM

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes
router image
This is the device image of your ZyXEL ZyWALL Z 70 UTM router.

This guide shows you how to reset your ZyXEL ZyWALL Z 70 UTM router. A router reset is very different than a router reboot. Unplugging a router from the wall reboots it. A Router Reset completely erases the router and returns it to factory settings.

Warning: Proceed with caution; resetting your router can be a major headache. When you reset your router, the following will happen.

  • The router's username and password are reset.
  • Your WiFi name and password are reset.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any port forwards, firewall settings, or parental controls that you have configured will be removed.

A router reset is the last step you should take in recovering your router's password. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other ZyXEL ZyWALL Z 70 UTM Guides

This is the reset router guide for the ZyXEL ZyWALL Z 70 UTM. We also have the following guides for the same router:

Recover Password in ZyXEL ZyWALL Z 70 UTM

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the ZyXEL ZyWALL Z 70 UTM

Most routers have a small button on either the back or the bottom. A typical reset button looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Remember, this will erase everything you have previously done to this ZyXEL ZyWALL Z 70 UTM router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the ZyXEL ZyWALL Z 70 UTM

Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can find all of the information that you need in our ZyWALL Z 70 UTM Login Guide.

Change Your Password

After logging in, you should really change your router's password for added security. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other ZyXEL ZyWALL Z 70 UTM Guides

We have collected a lot of information about the ZyXEL ZyWALL Z 70 UTM router. You can find some of our additional content here.

This is the reset router guide for the ZyXEL ZyWALL Z 70 UTM. We also have the following guides for the same router: