1net1 R-90 Default Password

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 2 minutes

If you want to login to the 1net1 R-90 router you need to know its default username and password.

This username and password is only used in order to login to the router's interface not the internet.

Other 1net1 R-90 Guides

This is the password guide for the 1net1 R-90. We also have the following guides for the same router:

Default Password for the 1net1 R-90

The table below lists all the known passwords for the 1net1 R-90 router. Go ahead and give each of them a try in order to login to your router.

admin blank

It is possible that the password list above will not work for your router. Router manufacturers like 1net1 are continually updating their firmware and sometimes a new firmware version has a different default password.

We also have a list of all known 1net1 passwords. You may want to try the passwords in this list as well.

Note: The password you use to login to your router is not usually the same as the password to connect to the internet. Most routers will have a different password for the Wi-Fi connection.

Default IP Address for the 1net1 R-90

If you want to login to your 1net1 R-90 router you may need to know the default IP address. This IP address is the one used to find the 1net1 on your network.

Below is a table that has all the known 1net1 R-90 default IP addresses.

192.168.0.1

Tip: The IP address that your 1net1 router is using may not be in this list. If the IP address doesn't work for you then you can use our free Router Detector software.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

1net1 R-90 Password Does Not Work

There are a lot of possible reasons that the 1net1 R-90 default password doesn't work. The most probable reason is that someone has changed it in the past.

If after trying all the above combinations you still can't login to the 1net1 R-90 router you may need to reset it to factory defaults. You can follow our How to Reset the 1net1 R-90 guide.

Make sure to follow the warnings at the top of the reset guide because resetting your router may disconnect you from the Internet if you don't know your ISP username and password.

1net1 R-90 Help

Be sure to check out our other 1net1 R-90 info that you might be interested in.

This is the password guide for the 1net1 R-90. We also have the following guides for the same router: