This guide goes over how to reset the Actiontec M1000 Qwest router to factory defaults. There is a difference between resetting the router and rebooting the router. Rebooting refers to cycling the power by turning if off and back on again. Resetting the router changes your settings back to the factory defaults.
Warning: When you reset your router there are setting that are changed and this may be a problem if you are unaware of them. Some things to consider are:
- The router's main username and password are reset.
- The WiFi username and password are reset to factory defaults as well.
- If you are using a DSL connection you will need to know your ISP username and password. If you are unsure of this info call your ISP.
- All configurations or changes you have made will be erased. Everything from parental controls to port forwards need to be re-entered.
Other Actiontec M1000 Qwest Guides
This is the reset router guide for the Actiontec M1000 Qwest. We also have the following guides for the same router:
- Actiontec M1000 Qwest - How to change the IP Address on a Actiontec M1000 Qwest router
- Actiontec M1000 Qwest - Actiontec M1000 Qwest Login Instructions
- Actiontec M1000 Qwest - Actiontec M1000 Qwest User Manual
- Actiontec M1000 Qwest - Actiontec M1000 Qwest Port Forwarding Instructions
- Actiontec M1000 Qwest - How to change the DNS settings on a Actiontec M1000 Qwest router
- Actiontec M1000 Qwest - Setup WiFi on the Actiontec M1000 Qwest
- Actiontec M1000 Qwest - Actiontec M1000 Qwest Default Password
- Actiontec M1000 Qwest - Actiontec M1000 Qwest Screenshots
- Actiontec M1000 Qwest - Information About the Actiontec M1000 Qwest Router
Reset the Actiontec M1000 Qwest
While your router is still on, turn it over so you are looking at the back panel.
Using a pen or the end of a paperclip press and hold the small reset button on the back of the router for about 10 seconds until the lights on the front change.
Resetting erases everything you have previously done to your Actiontec M1000 Qwest router. Be sure and try other troubleshooting methods first.
Warning: Do not unplug the router or turn it off during the reset process as this could permanently damage the router.
Login to the Actiontec M1000 Qwest
Once you have finished resetting the router you should login using the default username and password. If you would like to follow our Login Guide found here.
Change Your Password
Now that you have logged into the Actiontec M1000 Qwest router successfully you should change the router's password. This can be anything you like. If you need help creating a strong password check out this Choosing a Strong Password guide.
Tip: Write this new password down on a piece of paper and attach it to the bottom of your router for future reference.
Setup WiFi on the Actiontec M1000 Qwest
After resetting the router it is also essential that you make sure your WiFi is secure. Some router companies leave the security open meaning anyone close enough to your signal can use your Internet. This should be changed immediately. Use our How to Setup WiFi on the Actiontec M1000 Qwest
Actiontec M1000 Qwest Help
Be sure to check out our other Actiontec M1000 Qwest info that you might be interested in.
This is the reset router guide for the Actiontec M1000 Qwest. We also have the following guides for the same router:
- Actiontec M1000 Qwest - How to change the IP Address on a Actiontec M1000 Qwest router
- Actiontec M1000 Qwest - Actiontec M1000 Qwest Login Instructions
- Actiontec M1000 Qwest - Actiontec M1000 Qwest User Manual
- Actiontec M1000 Qwest - Actiontec M1000 Qwest Port Forwarding Instructions
- Actiontec M1000 Qwest - How to change the DNS settings on a Actiontec M1000 Qwest router
- Actiontec M1000 Qwest - Setup WiFi on the Actiontec M1000 Qwest
- Actiontec M1000 Qwest - Actiontec M1000 Qwest Default Password
- Actiontec M1000 Qwest - Actiontec M1000 Qwest Screenshots
- Actiontec M1000 Qwest - Information About the Actiontec M1000 Qwest Router