Setup Router logo in white Setup router name logo in white
Get Software

Reset the Actiontec T3200M

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This is the reset guide for the Actiontec T3200M router. This is not the same thing as rebooting a router. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.

  • The router's login credentials are reset.
  • Your WiFi login, password, and network name are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

A router reset is the last step you should take in recovering your router's password. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Actiontec T3200M Guides

This is the reset router guide for the Actiontec T3200M 31.164L.22 Telus. We also have the following guides for the same router:

Recover Password in Actiontec T3200M

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Actiontec T3200M

Usually there is a reset button located on the back or bottom of a router. A typical reset button looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. Sometimes the button is under a pinhole, and you need a paper clip to push it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. After a few seconds the lights should blink differently. When this happens, the reset is complete. You can hold the button down as long as you like, it will not hurt anything.

Remember, this will erase everything you have previously done to this Actiontec T3200M router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Actiontec T3200M

Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a T3200M Login Guide with all this information ready for you.

Change Your Password

Be sure to change your router's default password after you get logged back in. The factory default passwords for routers are very well known. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other Actiontec T3200M Guides

We have collected a lot of information about the Actiontec T3200M router. You can find some of our additional content here.

This is the reset router guide for the Actiontec T3200M 31.164L.22 Telus. We also have the following guides for the same router: